Shelter Bakersfield Insulation CompanyShelter Bakersfield Insulation Company(661) 377-0037

Closed-cell foam insulation in Bakersfield CA - a tight seal where space is short

A hot room over the garage, or a low roof with no space for more insulation? Closed-cell foam seals and insulates in one dense layer.

Orange closed-cell foam insulation fills the wooden framing around a sloped roof window.

Is closed-cell spray foam the right fix for my house?

Closed-cell foam insulation is a rigid foam we spray in place in Bakersfield, CA homes. It insulates and seals air leaks in one layer, and it sheds water instead of soaking it up.

Most calls about it start with a room over the garage that cooks all summer, a low roofline with no space for more insulation, or a floor that's drafty along the edges. Closed-cell costs more than open-cell foam, mostly because it takes more material to fill the same space, and that extra material is what makes it hard enough to resist crushing and dense enough to block moisture. Your price moves with how much area we cover, how thick the foam goes and how much repair comes first. The schedule turns on that repair work and on the product's re-entry time, which is when your family can come back inside. The estimate tells you which areas I'd spray, how thick, what it costs, and where something cheaper like attic air sealing would do the job.

What happens after you call about closed-cell foam?

  1. Call or send a request

    Call (661) 377-0037 or use the form, and we'll get back to you to set a time. It helps to know which rooms or areas bother you and roughly how many square feet they cover.

  2. I look and show you

    I do the estimate myself, up in the attic or under the house with a flashlight, and I show you what I found. You get what I'd do, where foam makes sense and where it doesn't, how thick it goes and the price, before anyone sprays a thing.

  3. Prep and repairs, then foam

    Your household and pets need somewhere else to be on spray day, so we set the date with you and get repairs out of the way first. Then our installers come in and spray.

  4. I check it before we leave

    Once the foam has cured, I go over the work myself before we call it done. The house gets aired out and cleaned up, and you come home when the product's re-entry time has passed.

How we install closed-cell foam insulation

Closed-cell costs more, so the first thing I do is tell you plainly whether your house needs it. If your ducts run through a hot attic or the roofline is too shallow for a thick layer, it often does. If not, sealing the gaps and topping up blown-in, which is loose fill blown through a hose, usually does more for the money. Where foam is the call, our crew fixes leaks and damage first, and I check the furnace, water heater and anything else that burns gas, because sealing a house tight around a flue that isn't venting right causes a new problem, and foam over a roof leak just gives the leak a nicer blanket. Then we cover what needs covering, spray to the thickness we agreed on, and work to the product's covering requirements, since some foams need a thermal or ignition barrier, a layer that goes over the foam, and we ask the maker which. For walls, guidance for hot, dry climates rates closed-cell highly effective in the cavities, and because the foam already acts as the vapor retarder, the inside of the wall shouldn't get a second one.

Rim joists, the board that runs around the edge of your floor framing, are a good spot for it, because closed-cell foam counts as an air barrier at a much thinner layer than open-cell. In an open attic where moisture isn't the worry, open-cell foam insulation fills the space with less material, and I'll point you there when it fits. Property managers get the same order of work and the same straight answer when they call about commercial insulation for the buildings they look after.

Find out where closed-cell foam pays off in your house

We reply within one business day to set a time for me to come out and look. The estimate is free, done at your home, and there's no obligation to go ahead.

Call (661) 377-0037

Closed-cell foam questions from Bakersfield homeowners

How much does closed-cell spray foam insulation cost in Bakersfield?

Closed-cell spray foam insulation in Bakersfield usually costs about $1 to $1.50 per board foot, which is the going rate in the area, not our quote. A board foot is one square foot, one inch thick, so a local cost guide counts 1,000 square feet sprayed 3 inches deep as 3,000 board feet, which means area and thickness together set the price. The estimate gives you the number for your own house.

How long do we have to stay out of the house after closed-cell spray foam?

Plan on being out from the start of spraying until the foam has cured and the house has been aired out and cleaned, which is what EPA guidance on re-entry calls for. Some makers recommend 24 hours before anyone comes back after a professional job, but it varies by product, so we plan your time away around the one we use. That goes for pets too, and the heating and cooling in the work area stays shut down and sealed off until the foam has fully cured and the space is aired out.

Is closed-cell foam worth paying more than open-cell?

It's worth it where you need foam that's rigid, thin and good at stopping moisture, and usually not where you just want a cooler attic. Those gains come from the extra material, so you're weighing that price against a foam that won't crush and that blocks moisture vapor. If your house doesn't need those things, I'll say so at the estimate.

What is the best way to insulate a cathedral ceiling or a low roofline?

Closed-cell foam sprayed under the roof is usually the best way, because it can insulate cathedral ceilings and unvented attics, the kind closed off at the roof instead of breathing through vents. It packs a lot of insulating value into each inch, so it reaches the required level even where there's no room for a thick layer.

Is spray foam insulation safe if someone in my house has asthma?

Settle that before you book, because EPA guidance says people with asthma, respiratory allergies, skin conditions or a past reaction to isocyanates, a chemical used in spray foam, should read the product information carefully and may want to consider other options. I can go over the product with you at the estimate, and if foam isn't a good fit, there are other ways to insulate and seal your house.

Who is allowed to install spray foam insulation in California?

Under state rules, installing any kind of insulation for temperature or sound control falls under the C-2 Insulation and Acoustical Contractor license classification. When you compare contractors, ask what license they hold. We're licensed and fully insured.

  • Open-cell foam insulation

    If your attic needs comfort more than a moisture block, the lighter foam can get you there for a smaller bill.

  • Commercial insulation

    Offices, shops and rental buildings get the same look before anything gets sprayed and the same plain call on which foam they need.

Get your attic checked before anything's sprayed

Once closed-cell foam is on, it's there to stay, so call (661) 377-0037 or use the form and let me look before you decide.

(661) 377-0037Request an estimate